User's Manual

Chapter 6 — Configuring the Computer
70 Series Mobile Computer User’s Manual 85
8 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings box appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and a Domain.
9 If you choose PEAP:
a Choose Properties > Run App. The Auth. Settings box appears.
b Select Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
c Enter a User Name and Password and select Save Password.
d (Optional) In the Domain field, enter the domain.
e Press Enter.
10 For Network Key Setting, choose Automatic.
11 Save your settings.
Configuring Static WEP Security With Microsoft Security
Use the following procedure to configure static WEP security with
Microsoft security.
1 Make sure the communications and radio parameters on your 70
Series are configured.
2 Start Intermec Settings.
3 Choose Communications > > 802.11 Radio > Microsoft
Security.
4 For Network Authentication, choose Open.
5 For Network Authentication, choose WPA. Data Encryption
automatically defaults to TKIP.
6 For 802.1x Authentication, choose either MD5, TLS, or PEAP.