User's Manual

Chapter 6 — Configuring the Computer
68 70 Series Mobile Computer User’s Manual
To open Intermec Settings from the SmartSystems console:
1) In the SmartSystems console, select a mobile computer and
right-click.
2) From the menu, select Intermec Settings.
3) Configure the settings you need to change. As you choose
parameters from the tree structure, help for each parameter
appears in the upper right pane of Intermec Settings.
4) When you are done making changes, choose File > Save Settings.
For help using Intermec Settings, click Help > Contents. For
information on all of the parameters in Intermec Settings, see the
Intermec Settings Command Reference Manual.
About Network Communications
You can easily add the 70 Series to your wireless or wired data
collection network. You can connect your computer using:
• 802.11b/g radio communications.
• Ethernet communications.
• Bluetooth communications.
• USB and serial communications.
Configuring 802.11b/g Radio Communications
The 70 Series computer contains an 802.11 radio to transfer data using
wireless communications and supports the TCP/IP network protocols.
This section of the manual assumes that your wireless network is set
up, including your access points.
Make sure all components with antennas are at least 30 cm (1 ft)
apart when power is applied. Failure to comply could result in
equipment damage.