User's Manual

Chapter 6 — Configuring the Computer
70 Series Mobile Computer User’s Manual 67
To restore all defaults:
1) Tap Menu > Restore All Defaults. The applications asks if you are
sure you want to restore all defaults.
2) Tap Yes.
After several minutes, all of the default settings are restored.
Hiding Menu Items in Intermec Settings
You can hide items in the Intermec Settings menus if you do not want
to have them available for other users to access. Hidden items are not
saved when you back up your settings in the SmartSystems console.
On the 70 Series computer, you can:
• hide menu items by tapping and holding the item, and then
choosing Hide Menu Item from the popup list. When asked if you
want to hide the menu, tap Yes.
• restore hidden items in a single menu, by tapping and holding the
menu bar where the item was hidden, and then choose Restore
Item Default from the popup list.
• restore all hidden items in all menus, by tapping Menu > Unhide
All Items.
Using Intermec Settings Remotely With
SmartSystems Foundation
Your 70 Series computer is SmartSystems-enabled, which lets you
open Intermec Settings from the SmartSystems console to remotely
configure all of your mobile computers. For more information on
SmartSystems, see “Managing the Computer Using SmartSystems”
on page 92.
Note: When you restore default settings in Intermec Settings, only the
settings for visible items are restored to defaults. The settings for
hidden menu items are not affected.