User's Manual

Chapter 3 — Using the Phone
48 70 Series Mobile Computer User’s Manual
6 Close the SIM card door and slide it to the right to lock it in place.
7 Close the card access door and replace the two screws.
8 Install the battery. Press down firmly on the bottom of the battery,
and make sure that the battery release tab is fully engaged.
9 Press the Power button. The computer cold boots.
Activating the CDMA Phone
To activate the CDMA radio module in your mobile computer, you
need to contact your wireless carrier and set up an account for each
mobile computer. The following table lists the carriers that Intermec
currently supports. If your carrier is not listed in the table, please
contact Intermec product support to see if it is now supported.
Currently Supported Carriers
The carrier will require the Electronic Serial Number (ESN) to start the
activation process. You can find the ESN:
• on a label located in the upper right corner of hte battery
compartment.
• on the outside of the computer shipping box.
Country Carriers
United States Sprint, Verizon