User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Understanding the User Interface and Intermec Applications
- Chapter 3 - Using the Phone
- Chapter 4 - Using the Camera
- Chapter 5 - Using GPS
- Chapter 6 - Configuring the Computer
- How to Configure the Computer
- Using Intermec Settings on the Computer
- Using Intermec Settings Remotely With SmartSystems Foundation
- About Network Communications
- About Wireless Security
- Chapter 7 - Managing the Computer
- Chapter 8 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 Physical Dimensions
- CN70e Physical Dimensions
- CK70 Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- Default Configuration
- Physical and Environmental Specifications
Chapter 1 — Using the Computer
26 70 Series Mobile Computer User’s Manual
Inserting a microSD Card
You can use a microSD™ card to increase file storage and install
software. The 70 Series computers support an optional 32 GB
maximum capacity microSD card.
To install a microSD card on a CN70 or CN70e:
1 Press the Power button to turn off the computer.
2 Remove the battery.
3 Remove the two Phillips screws and open the card access door.
Note: The computer resets when you remove the battery.