User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Understanding the User Interface and Intermec Applications
- Chapter 3 - Using the Phone
- Chapter 4 - Using the Camera
- Chapter 5 - Using GPS
- Chapter 6 - Configuring the Computer
- How to Configure the Computer
- Using Intermec Settings on the Computer
- Using Intermec Settings Remotely With SmartSystems Foundation
- About Network Communications
- About Wireless Security
- Chapter 7 - Managing the Computer
- Chapter 8 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 Physical Dimensions
- CN70e Physical Dimensions
- CK70 Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- Default Configuration
- Physical and Environmental Specifications
Chapter 1 — Using the Computer
8 70 Series Mobile Computer User’s Manual
About the Battery
The 70 Series computer uses a battery pack as its main power source:
• Model 1000AB01 for the CN70 and CN70e
• Model 1001AB01 for the CK70 and CK71
Magstripe Reader Snap-On
Adapter (Model 1000AA06)
Use the magnetic stripe reader to be
able to read magnetic cards with the
computer.
RS-232 Snap-On Adapter
(Model 1000AA03)
Use the RS-232 adapter to convert the
connector on the bottom of the
computer to a serial connector.
Scan Handle Use the scan handle to provide better
ergonomics to the computer for
high-volume scanning applications.
Tethered Stylus Replacement
Kit
You can order and install a
replacement stylus.
USB Snap-On Adapter (Model
1000AA07)
Use this adapter to convert the
bottom connector of the computer to
a USB connector.
Vehicle Holder Use the vehicle holder to hold your
computer while you are using it in a
vehicle.
Vehicle Power Adapter (Models
9002AX01 and 9002AX02)
Use the vehicle power adapter to provide
power to the computer from your vehicle.
You can choose from a 3-pin or Hirose
style connector.
Vocollect Snap-On Adapter
(Model 1000AA05)
Use this adapter to be able to use the
Vocollect voice solution in your
warehouse.
Accessory Description
The battery used in this device may present a fire or chemical burn
hazard if it is mistreated. Do not disassemble it, heat it above
100°C (212°F) or incinerate it. Dispose of used batteries
promptly. Keep away from children.