User's Manual Part 2

Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
70 Series Mobile Computer User Manual 167
2D Imager Radio Configuration Bar Codes
1D Configuration Bar Codes
Follow these directions to configure the computer with a 1D imager
(EV12):
1 Scan the START HERE bar code from the table and wait for the
program to start.
2 Scan the bar code labeled 1/13 or 1/20 depending of the wireless
security you want to use.
3 Scan the rest of the bar codes in any order.
4 Follow any instructions on the device.
To Configure These Settings: Scan This Bar Code
Enable Wi-Fi - set Funk defaults
Enable Wi-Fi radio - set Microsoft WZC defaults
DRAFT