User's Manual
Table Of Contents
- Chapter 6 - Configure the Computer
- How to Configure the Computer
- Use Intermec Settings on the Computer
- Use Intermec Settings Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Chapter 7 - Manage the Computer
- Chapter 8 - Troubleshoot and Maintain the Computer
- Appendix A - Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 Physical Dimensions
- CN70e Physical Dimensions
- CK70 Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- 70 Series Non-Incendive Computer Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- EA30 Typical Reading Distances - Extended Reading Range
- EA30 Area Imager Minimum Reading Distances
- EA30 Area Imager Typical Reading Distances
- EV12 Linear Imager Minimum Reading Distances
- EV12 LInear Imager Typical Reading Distances
- EX25 Near-Far Range Imager Minimum Reading Distance
- EX25 Near-Far Range Imager Typical Reading Distance
- Default Configuration
- Physical and Environmental Specifications
- Appendix B - Keypads and Keystrokes
- Appendix C - ScanNGo Wi-Fi Configuration Bar Codes
- Index
Appendix A — Specifications and Default Settings
146 70 Series Mobile Computer User Manual
Ethernet Adapter Settings
Bluetooth Settings
WWAN Radio Settings
Serial Port Switch
Device Settings
Use device settings to configure settings on the mobile computer.
Device Settings
Import User Certificates False
Import Pac Files False
Radio Bands b/g (2.4 GHz)
Radio Enabled Off
Ethernet Adapter Setting Default Value
DHCP Enabled
Bluetooth Setting Default Value
Bluetooth Power Off
WWAN Radio Setting Default Value
WWAN Radio Enabled Enabled
Serial Port Switch Setting Default Value
Serial Port Switch Standard Docking and IrDA
802.11 Radio Setting Default Value
Device Setting Default Value
Date N/A
Time N/A