User's Manual
Table Of Contents
- Document Change Record
- Contents
- Before You Begin
- About the Computer Features
- About the 70 Series Mobile Computers
- 70 Series Accessories
- About Language Provisioning
- About the Battery
- About the Keypad
- Configure the Screen Backlight
- Configure the Screen Brightness
- Adjust the Volume
- About the Imager
- Use the Imager as a Flashlight
- Read Bar Codes
- Read an RFID Tag
- Insert a MicroSD Card
- Transfer Files to and from Your PC
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- Use Intermec Settings on the Computer
- Use Intermec Settings Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Manage the Computer
- Manage the Computer in Your Network
- Develop and Install Applications
- RFID Applications and the IF2
- Using the RFID Resource Kit
- Creating RFID Applications for the IF2
- Package Your Application
- Choose a Target Location
- Install Applications Using SmartSystems Foundation Console
- Install Applications Using Microsoft ActiveSync
- Install Applications Using a Storage Card
- Launch Applications Automatically
- Update the System Software
- Troubleshoot and Maintain the Computer
- Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 & CN70 RFID Physical Dimensions
- CN70e & CN70e RFID Physical Dimensions
- CK70 & CK70 RFID Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- 70 Series Non-Incendive Computer Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- EA30 Typical Reading Distances - Extended Reading Range
- EA30 Area Imager Minimum Reading Distances
- EA30 Area Imager Typical Reading Distances
- EV12 Linear Imager Minimum Reading Distances
- EV12 LInear Imager Typical Reading Distances
- EX25 Near-Far Range Imager Minimum Reading Distance
- EX25 Near-Far Range Imager Typical Reading Distance
- Default Configuration
- Physical and Environmental Specifications
- Keypads and Keystrokes
- ScanNGo Wi-Fi Configuration Bar Codes
- Index
DRAFT
Appendix A — Specifications and Default Settings
134 70 Series Mobile Computer User Manual
EA30 Typical Reading Distances - Extended Reading
Range
These typical reading distances are measured in an office environment
(250 lux) for the EA30 standard model with Extended Reading Range
activated. Extended Reading Range is enabled by default.
EA30 Typical Reading Distances - Extended Reading Range Activated
EA30 Typical Reading Distances - Extended Reading Range Activated
Symbology Density
Minimum
Distance
Maximum
Distance
Code 39 0.125 mm/5 mils
0.50 mm/20 mils
1 mm/40 mils
64.50 cm/2.56 in
7 cm/ 2.76 in
14.50 cm/5.71 in
24.50 cm/9.65 in
62.50 cm/24.61 in
97.50 cm/38.39 in
EAN/UPC 100% 0.33 mm/13 mils 6 cm/2.36 in 40 cm/15.75 in
4"
8"
0"
4"
8"
12"
12"
cm
0.5 mm / 20 mils
1 mm / 40 mils
in
0" 36" 40"32"28"24"20"16"12"8"4"
0908070605040302010
100
EAN/UPC
0.125mm/5 mils
10
0
10
20
20
30
30