User's Manual
Table Of Contents
- Document Change Record
- Contents
- Before You Begin
- About the Computer Features
- About the 70 Series Mobile Computers
- 70 Series Accessories
- About Language Provisioning
- About the Battery
- About the Keypad
- Configure the Screen Backlight
- Configure the Screen Brightness
- Adjust the Volume
- About the Imager
- Use the Imager as a Flashlight
- Read Bar Codes
- Read an RFID Tag
- Insert a MicroSD Card
- Transfer Files to and from Your PC
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- Use Intermec Settings on the Computer
- Use Intermec Settings Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Manage the Computer
- Manage the Computer in Your Network
- Develop and Install Applications
- RFID Applications and the IF2
- Using the RFID Resource Kit
- Creating RFID Applications for the IF2
- Package Your Application
- Choose a Target Location
- Install Applications Using SmartSystems Foundation Console
- Install Applications Using Microsoft ActiveSync
- Install Applications Using a Storage Card
- Launch Applications Automatically
- Update the System Software
- Troubleshoot and Maintain the Computer
- Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 & CN70 RFID Physical Dimensions
- CN70e & CN70e RFID Physical Dimensions
- CK70 & CK70 RFID Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- 70 Series Non-Incendive Computer Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- EA30 Typical Reading Distances - Extended Reading Range
- EA30 Area Imager Minimum Reading Distances
- EA30 Area Imager Typical Reading Distances
- EV12 Linear Imager Minimum Reading Distances
- EV12 LInear Imager Typical Reading Distances
- EX25 Near-Far Range Imager Minimum Reading Distance
- EX25 Near-Far Range Imager Typical Reading Distance
- Default Configuration
- Physical and Environmental Specifications
- Keypads and Keystrokes
- ScanNGo Wi-Fi Configuration Bar Codes
- Index
DRAFT
Appendix A — Specifications and Default Settings
70 Series Mobile Computer User Manual 129
Power and Electrical Specifications
70 Series Non-Incendive Computer Specifications
The 70 Series mobile computers with non-incendive (NI) certification
comply with the following specifications for North America and
Canada regions only.
Operating System
Microsoft Windows Embedded Handheld.
Battery type Rechargeable Lithium-ion (Li-ion) battery
Battery capacity
CN70/CN70e: 3.7 V, 4000 mAh (14.8 Wh)
CK70/CK71: 3.7 V, 5200 mAh (19.2 Wh)
Electrical rating x 4.37/4.8 V; 2/1,5 A
Location Suitable for use in Division 2 locations
Safety cULus Listing - ISA/ANSI 12.12.01
Gases Class I - Groups A, B, C, D
Dusts Class II - Groups F, G
Fibers and Flyings Class III
Maximum Ambient Temperature T6 rating with a maximum temperature
of 50 °C