User's Manual

DRAFT
Chapter 1 — About the Computer Features
70 Series Mobile Computer User Manual 29
Scanning With the EA30 Imager
5 Use the laser pointer as a guide and aim toward the middle of the
bar code. Make sure that the illumination beam or frame covers the
bar code you are trying to decode.
When the computer successfully reads a bar code label, you hear a
high beep, and the Good Read LED turns on briefly.
6 Release the Scan button.
Read an RFID Tag
You can use the 70 Series RFID Demo to read a single or a group of
RFID tags. Follow the instructions below to read a single RFID tag:
1 Start the Intermec 70 Series RFID Demo.
2 Tap Start > Menu.The Read Mode tab appears.
3 From Scan mode drop-down menu, select Read single tag.
4 Position the tab an inch from the scanner.
5 Scan the tag.
6 If the read is successful, a table appears at the bottom of the screen
that displays the EPC value of the tag.