User's Manual
Table Of Contents
- Document Change Record
- Contents
- Before You Begin
- About the Computer Features
- About the 70 Series Mobile Computers
- 70 Series Accessories
- About Language Provisioning
- About the Battery
- About the Keypad
- Configure the Screen Backlight
- Configure the Screen Brightness
- Adjust the Volume
- About the Imager
- Use the Imager as a Flashlight
- Read Bar Codes
- Read an RFID Tag
- Insert a MicroSD Card
- Transfer Files to and from Your PC
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- Use Intermec Settings on the Computer
- Use Intermec Settings Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Manage the Computer
- Manage the Computer in Your Network
- Develop and Install Applications
- RFID Applications and the IF2
- Using the RFID Resource Kit
- Creating RFID Applications for the IF2
- Package Your Application
- Choose a Target Location
- Install Applications Using SmartSystems Foundation Console
- Install Applications Using Microsoft ActiveSync
- Install Applications Using a Storage Card
- Launch Applications Automatically
- Update the System Software
- Troubleshoot and Maintain the Computer
- Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 & CN70 RFID Physical Dimensions
- CN70e & CN70e RFID Physical Dimensions
- CK70 & CK70 RFID Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- 70 Series Non-Incendive Computer Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- EA30 Typical Reading Distances - Extended Reading Range
- EA30 Area Imager Minimum Reading Distances
- EA30 Area Imager Typical Reading Distances
- EV12 Linear Imager Minimum Reading Distances
- EV12 LInear Imager Typical Reading Distances
- EX25 Near-Far Range Imager Minimum Reading Distance
- EX25 Near-Far Range Imager Typical Reading Distance
- Default Configuration
- Physical and Environmental Specifications
- Keypads and Keystrokes
- ScanNGo Wi-Fi Configuration Bar Codes
- Index
DRAFT
Chapter 1 — About the Computer Features
28 70 Series Mobile Computer User Manual
Read Bar Codes
Depending on the imager model in your computer, you can read 1D
and 2D bar code symbologies, composite symbologies, and postal
codes.
You can also connect the computer to cordless scanners (like the SF51
and SR61) through Bluetooth communications or tethered scanners
(like the SR30 and SR61T) through the RS-232 adapter. For help, see
“Connect to a Bluetooth Scanner” on page 84 and “Connect to a
Tethered Scanner” on page 88
, respectively.
1 Enable only the bar code symbologies that you need.
2 Use Intermec Settings to select the predefined imager mode that
best suits your environment:
3 Point the imager window at the bar code label, and hold the
computer steady a few inches from the label.
4 Press the Scan button. The laser pointer and illumination beam or
frame appear.
Predefined Mode For Scanning
1D Only 1D labels.
1D and 2D Standard (Default) All types of bar code labels.
1D and 2D Bright Environment In high ambient light, such as outdoors
in the sunshine.
1D and 2D Reflective Surface Glossy labels.
Note: You can also select the imager predefined mode in Profile
Settings by tapping Start > Profile Settings > Scanning.