70 Series Mobile Computer CK70, CK70NI, CK71, CK71NI, CN70, CN70NI, CN70e, CN70eNI, CK70 RFID, CN70e RFID, CN70 RFID T F D A R User Manual
Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.
Document Change Record This page records changes to this document. The document was originally released as Revision 001. Version Number Date Description of Change 006 01/2013 Added information to support Intermec RFID standalone demonstration application for these mobile computers: CK70 RFID, CN70e RFID, and CN70 RFID. 005 11/2012 Added information to support firmware version 1.
1 About the Computer Features T F This chapter introduces the 70 Series Mobile Computers with Windows® Embedded Handheld operating system. Use this chapter to learn about the basic features and functions of each computer, as well as the available accessories for it.
Chapter 1 — About the Computer Features About the 70 Series Mobile Computers The ergonomically designed Intermec 70 Series Mobile Computers are built on the Microsoft Windows Embedded Handheld operating system. They are lightweight, easy-to-use, and run most software developed for the Windows Embedded platform, including standalone, client-server, and browser-based applications. The 70 Series family of computers consists of four different models: the CN70, CN70e, CK70 and CK71.
Chapter 1 — About the Computer Features CN70 Back View Imager Camera Speaker port Battery T F IrDa port A R CK70 and CK71 Front View Cell phone speaker Good read LED Notification LED D Battery status LED Scan button On/off button 70 Series Mobile Computer User Manual Microphone 3
Chapter 1 — About the Computer Features CK70 and CK71 Back View Imager Camera Imager Camera Left speaker port Left speaker port T F IrDA port IrDA port Battery Battery A R What’s New in This Release This version of the user manual supports the following new features: • Intermec 70 Series RFID Demo IM11 application allows users to read and write RFID tags without the use of an outside application such as Notepad or Excel. For more information, see “About Intermec 70 Series RFID Demo” on page 48.
Chapter 1 — About the Computer Features • • • • • 5-megapixel auto-focus color camera Customer-accessible microSD slot for memory cards up to 32 GB Customer-accessible SIM card slot IrDA port with speeds up to 4 Mbps Intermec RFID Demo (models: CK70 RFID, CN70e RFID, and CN70 RFID) integrated with UHF reader allows users to scan and write data to RFID tags T F The 70 Series Mobile Computer with an IEEE 802.11a/b/g/n radio installed is Wi-Fi® certified for interoperability with other 802.
Chapter 1 — About the Computer Features Location of the CK70 and CK71 Status LEDs Notification LED Orange key status LED Good Read and Ready-to-Work status LED Battery status LED Green key status LED T F Shift key status LED (CK70 alphanumeric and CK71 function numeric) A R Shift key status LED (CK70 numeric and CK71 alphanumeric) Status LED Descriptions LED Color Description Notification Amber This LED is user-programmable.
Chapter 1 — About the Computer Features LED Color Description Key Status Green The Green function key is enabled. When writing RFID tags, a Good Read LED will blink on Green if a write is successful. Orange The Orange function key is enabled. Red The Shift key is enabled. When writing RFID tags, the Battery Status LED will turn on Red for 1 second and then return to its previous state if a write is unsuccessful. Shift T F 70 Series Accessories The 70 Series computer ships with a battery.
Chapter 1 — About the Computer Features Accessory Description DEX/UCS Snap-On Adapter Use this adapter to receive and send serial communications through a DEX/UCS connection. DX1 Desktop Dock with USB connectivity Use the desktop dock with the: • Computer cup to charge the battery while it is installed in the computer. • Battery cup to charge the battery. T F DX2 Dual Dock and DX4 Quad Dock. The DX2 and DX4 are available in charge-only and Ethernet configurations.
Chapter 1 — About the Computer Features Accessory Description Vehicle Holder Use the vehicle holder to hold your computer while you are using it in a vehicle. Vehicle Power Adapter Use the vehicle power adapter to provide power to the computer from your vehicle. Vocollect® Snap-On Adapter Use this adapter to be able to use the Vocollect voice solution in your warehouse.
Chapter 1 — About the Computer Features About the Battery The battery used in this device may present a fire or chemical burn hazard if it is mistreated. Do not disassemble it, heat it above 100 °C (212 °F) or incinerate it. Dispose of used batteries promptly. Keep away from children. The computers use these rechargeable Lithium-ion battery pack as the main power source: • • T F 3.7 V, 4000 mAH (14.8 Wh) battery for the CN70 and CN70e 3.7 V, 5200 mAH (19.
Chapter 1 — About the Computer Features 3 Detach the handstrap from the computer. Detach the Handstrap From a CN70 or CN70e T F Detach the Handstrap From a CK70 or CK71 D A R 4 Make sure the computer is in hibernate mode and the screen is off. 5 Remove the battery. • On the CN70 or CN70e, push the battery release toward the bottom of the computer until the battery releases and then lift it away from the computer.
Chapter 1 — About the Computer Features T F On the CK70 or CK71, push the battery release toward the top of the computer until the battery releases and then lift it away from the computer. • A R D 6 Insert the top end of a fully charged battery into the computer, and press down firmly on the bottom of the battery. Make sure that the battery release is fully engaged.
Chapter 1 — About the Computer Features About Battery Status Use the battery icon on the Title bar to see the power status of your battery. If you want more detailed information on your battery such as usage time or voltage, use the Intermec Dashboard. For more information on the Dashboard, see “About the Intermec Dashboard” on page 114. Battery Icon Status Descriptions T F Battery Icon Status Battery is fully charged. Battery has a high charge. Battery has a medium charge.
Chapter 1 — About the Computer Features Battery Status LED Descriptions LED State Description Steady green The computer is connected to a charger and the battery is more than 95% charged. Blinking red The battery is very low. The computer will soon go into Suspend mode. Charge or replace the battery. Steady red The computer is connected to a charger and the battery is charging. Blinking red-amber The battery charging system has encountered an error. The battery is not charging.
Chapter 1 — About the Computer Features When You Want To: Do This to Save Battery Power: Store the computer for more than a day. If you are storing the computer for a few days, like over the weekend, install a charged battery or connect the computer to a power source. If you are storing the computer for longer, remove and charge the battery, and then store both the battery and computer in a cool location. If you store the battery for several months, recharge the battery to keep it at peak performance.
Chapter 1 — About the Computer Features CN70 Numeric Keypad Esc 1 Caps 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ 0 Space T F Enter CN70e QWERTY Numeric Keypad A R D 16 70 Series Mobile Computer User Manual
Chapter 1 — About the Computer Features CN70e Calculator-Style Numeric Keypad T F A R CN70e Numeric Keypad D 70 Series Mobile Computer User Manual 17
Chapter 1 — About the Computer Features The CK70 comes with either a large alpha or an alphanumeric keypad. The CK71 comes with either a numeric function keypad or an alphanumeric keypad. The computer has an ambient light sensor that detects low light and turns on the keypad backlight. By default, the keypad backlight is enabled in low light conditions. You can disable the keypad backlight to conserve power. Use Intermec Settings to configure the backlight.
Chapter 1 — About the Computer Features CK70 Alphanumeric Keypad Esc Alt F6 Send End 1 F1 F7 2 T F 3 Insert Delete F2 4 5 6 F3 7 8 9 F8 F9 0 F4 Enter F10 F5 Ctrl A R F11 F12 A B F17 F18 G F23 Space F13 F14 C F19 F15 D F20 F16 E F F22 F21 I J K L N O P Q R T U V W X Y Z H F24 M S D 70 Series Mobile Computer User Manual 19
Chapter 1 — About the Computer Features CK71 Numeric Function Keypad View Insert Fld- Fld+ View SysRq Return Page Fld Exit Enter A PrvScr B Roll 7 8 D Delete E F 5 PA1 H 1 J Clear Reset 6 I PA2 Esc PA3 2 Home 3 Attn Space K Return 0 L F17 F5 T Enter A R F13 F1 P T F 9 Roll 4 G C NxtScr F21 F9 M F14 N F2 Q F18 F22 S F7 Ctrl F20 F8 F23 W F24 F12 F11 Y F16 F4 F19 V F10 X O F3 R F6 U F15 Z Alt D 20 70 Series Mobile Computer User Man
Chapter 1 — About the Computer Features CK71 Alphanumeric Keypad Alt Reset Page View Fld Exit F6 Esc PA1 PrvScr 7 F1 F7 PA2 4 Fld- PA3 Roll Delete T F 9 5 Clear 6 Help Fld+ 1 F3 NxtScr 8 Insert F2 F8 Roll 2 3 F9 Autolog Return 0 F4 Enter F10 EEOF F5 Ctrl Space A R F11 Attn A F12 B F13 F14 Dup F15 Erase F16 Find C D E G H I F23 Menu F24 NewLn Mode M S F F21 Keypd F22 F17 FldMk F18 Home F19 Hex F20 J K L Print SysRq Remove Q R W X N O P T
Chapter 1 — About the Computer Features Enter Characters on the QWERTY Keypad You need to use the orange modifier key b and the Shift key y to access all characters and functions on the QWERTY keypad. To type a character: • Press the key for that character. To type a character or access a function on the overlay: T F • Press b and then press the key for the character or function.
Chapter 1 — About the Computer Features For example, in the upper right corner of the 2 key there are the letters “ABC”: • To type “c”, press c 2 2 2. • To type “C,” press c 1 and then press c 2 2 2. Note: On the calculator-style keypad, the 2 is replaced by the 8. To only type letters: T F Press c c to lock the green modifier key, and then press the key one to four times depending on the position of the letter.
Chapter 1 — About the Computer Features About the Power Button When you press the Power button, a dialog box with a list of power options appears. If you do not select a power options setting, the currently selected action (the button outlined in bold) occurs after the timeout. The Intermec Power Options Default Screen T F A R Note: The Real Time Clock (RTC) persists through all of the power options as long as it receives power from the Real Time Clock battery.
Chapter 1 — About the Computer Features Option Description Suspend Medium power saving mode. The computer powers off all radios and internal devices not involved in saving the system state, but the phone stays on to receive calls. This option is the default setting. You can wake the computer by pressing the Power button, pulling the scanner trigger, receiving a call, scheduling an event such as an alarm, or by connecting external power.
Chapter 1 — About the Computer Features Configure the Screen Backlight The display has an ambient light sensor that automatically adjusts the backlight intensity to conserve power and ensure the display is readable. By default, the screen turns off when there is no activity with the computer. Press a key or tap the screen to resume activity. T F You can configure the screen backlight to turn off. 1 Tap Start > Settings > Power. 2 Tap Advanced on the horizontal scroll bar.
Chapter 1 — About the Computer Features You can adjust the volume settings using Intermec Settings or the horizontal scroll menu. 1 Tap the Volume icon at the top of the screen, and then tap the volume icon on the horizontal scroll menu. 2 Use your stylus or the u and d keys to adjust the volume slider to the volume you want, select Vibrate, or select Off. T F About the Imager The computer ships with an internal imager. You can use the imager as a flashlight or to read bar codes.
Chapter 1 — About the Computer Features Read Bar Codes Depending on the imager model in your computer, you can read 1D and 2D bar code symbologies, composite symbologies, and postal codes. You can also connect the computer to cordless scanners (like the SF51 and SR61) through Bluetooth communications or tethered scanners (like the SR30 and SR61T) through the RS-232 adapter. For help, see “Connect to a Bluetooth Scanner” on page 84 and “Connect to a Tethered Scanner” on page 88, respectively.
Chapter 1 — About the Computer Features Scanning With the EA30 Imager T F 5 Use the laser pointer as a guide and aim toward the middle of the bar code. Make sure that the illumination beam or frame covers the bar code you are trying to decode. A R When the computer successfully reads a bar code label, you hear a high beep, and the Good Read LED turns on briefly. 6 Release the Scan button. Read an RFID Tag You can use the 70 Series RFID Demo to read a single or a group of RFID tags.
Chapter 1 — About the Computer Features T F A R For more information about how to use the 70 Series RFID Demo application, refer to the Intermec 70 Series RFID Demo User Guide. Insert a MicroSD Card You can use a microSD™ card to increase file storage and install software. The computers support an optional 32 GB maximum capacity microSD card. D Note: The computer resets when you open the card access door to insert the microSD card.
Chapter 1 — About the Computer Features 3 Remove the two Phillips screws and open the card access door. T F 4 Slide the SIM card door to the left to unlock it and open the door. A R D 5 Slide the microSD card door towards the top of the computer to unlock it and open the door.
Chapter 1 — About the Computer Features T F 6 Slide the microSD card into place. A R D 7 Close the microSD card door and slide it towards the bottom of the computer to lock it in place. 8 Close the SIM card door and slide it to the right to lock it in place. 9 Close the card access door and replace the two screws. 10 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged. 11 Attach the handstrap. 12 Press the Power button.
Chapter 1 — About the Computer Features Install a MicroSD Card in a CK70 or CK71 You need a Phillips screwdriver to install the microSD card. 1 Press the Power button to turn off the computer. 2 Remove the handstrap. 3 Remove the two screws that attach the interface adapter cover to the back of the computer. T F A R 4 Slide the SIM card door to the left to unlock it and open the door. D 5 Slide the microSD card door towards the top of the computer to unlock it and open the door.
Chapter 1 — About the Computer Features T F 6 Slide the microSD card into place. A R D 7 Close the microSD card door and slide it towards the bottom of the computer to lock it in place. 8 Close the SIM card door and slide it to the right to lock it in place. 9 Replace the interface adapter cover and attach with the two screws removed in Step 2. 10 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged.
Chapter 1 — About the Computer Features Transfer Files to and from Your PC The 70 Series computer supports these two methods for transferring files to and from your PC: • • Using Microsoft ActiveSync or Windows Mobile Device Center. Using the 70 Series computer as a mass storage device.
Chapter 1 — About the Computer Features T F Use the Computer as a Mass Storage Device You can connect the 70 Series computer as a mass storage device to your desktop PC. When connected as a mass storage device, you can easily copy files to and from the mobile computer. A R 1 Go to www.datalight.com and download the Reliance Nitro Windows Driver (RNWD). You need to login before you can download the driver. 2 Connect the mobile computer to your desktop PC using a USB cable.
A Specifications and Default Settings T F A R D 127
Appendix A — Specifications and Default Settings Physical and Environmental Specifications CN70 & CN70 RFID Physical Dimensions Dimensions 16.9 x 8.0 x 3.4 cm (6.66 x 3.14 x 1.35 in) Weight 450 g (15.9 oz) with battery T F CN70e & CN70e RFID Physical Dimensions Dimensions 19.5 x 8.0 x 3.4 cm (7.66 x 3.14 x 1.35 in) Weight 491 g (17.3 oz) with battery CK70 & CK70 RFID Physical Dimensions Dimensions 23.7 x 8.0 x 4.3 cm (9.33 x 3.16 x 1.
Appendix A — Specifications and Default Settings Power and Electrical Specifications Battery type Rechargeable Lithium-ion (Li-ion) battery Battery capacity CN70/CN70e: 3.7 V, 4000 mAh (14.8 Wh) CK70/CK71: 3.7 V, 5200 mAh (19.2 Wh) Electrical rating x 4.37/4.8 V; 2/1,5 A T F 70 Series Non-Incendive Computer Specifications The 70 Series mobile computers with non-incendive (NI) certification comply with the following specifications for North America and Canada regions only.
Appendix A — Specifications and Default Settings Hardware Main processor options TI OMAP3, 1 GHz TI OMAP3, 600 MHz Memory 512 MB RAM Persistent storage 1 GB Flash Removable storage up to 32 GB user-accessible microSD card slot Keypad CN70: QWERTY, Numeric CN70e: QWERTY Numeric, Numeric, Calculator-style CK70: Large Alpha, Alphanumeric CK71: Numeric Function, Alphanumeric Imaging options 5 megapixel color camera and EA30 area imager (all), EV12 (CK71 only), or EX25 (CK71 only) Back Accessory Inter
Appendix A — Specifications and Default Settings Standard Communications • • • • • • • • UMTS (not available on CK71) CDMA (not available on CK71) Flexible Network Radio (not available on CK71) GPS (not available on CK71) 802.11a/b/g/n Bluetooth USB Full Speed V2.0 Host USB Full Speed V2.0 Client T F Wireless LAN Standards compliant IEEE 802.11a/b/g/n (2.4 GHz and 5 GHz), Single Stream A R Data rates up to 72Mbps Security 802.11i, WPA, WPA2, 802.
Appendix A — Specifications and Default Settings Bar Code Symbologies The imagers support all of the bar code symbologies listed in the next table.
Appendix A — Specifications and Default Settings Imager Reading Distances Typical reading distances are done in an office environment using office lights (4 lux). Minimum distances are measured in the dark (0 lux). Both reading distances are provided in respective scan engine integration guides. Contact your local Intermec representative for more information. Below are the typical and minimum standard reading distances for the 70 Series computer built with an EA30 imager.
Appendix A — Specifications and Default Settings EA30 Typical Reading Distances - Extended Reading Range These typical reading distances are measured in an office environment (250 lux) for the EA30 standard model with Extended Reading Range activated. Extended Reading Range is enabled by default. EA30 Typical Reading Distances - Extended Reading Range Activated 0" 4" 8" 12" 16" 20" 24" 28" in 32" 36" 40" T F 12" 30 8" 20 4" 0" 10 A R 4" 8" 0.125mm/5 mils EAN/UPC 0.
Appendix A — Specifications and Default Settings EA30 Area Imager Minimum Reading Distances Minimum distances are measured in the dark (0 lux). 0" 4" 8" 12" 16" 20" 24" 28" in 12" 30 Data Matrix 10 mils 8" T F 20 PDF417 10 mils 4" 10 0" 0 4" 10 0.125mm/5 mils A R 8" EAN/UPC 0.5 mm / 20 mils 12" 1 mm / 40 mils 0 10 20 30 40 50 60 20 30 cm 70 EA30 Minimum Reading Distances D Symbology Density Minimum Distance Maximum Distance Code 39 0.1 mm (4 mils) 0.
Appendix A — Specifications and Default Settings EA30 Area Imager Typical Reading Distances Typical distances are measured in an office environment (250 lux). 0" 4" 8" 12" 16" 20" 24" 28" 32" 36" in 12" 30 T F Data Matrix 10 mils 8" 20 PDF417 10 mils 4" 10 0" 4" 0 0.125mm/5 mils A R 8" EAN/UPC 0.
Appendix A — Specifications and Default Settings EV12 Linear Imager Minimum Reading Distances The illustration below does not include the 0.12 cm (0.05 in) setback for the CK71. Minimum reading distances are measured in the dark (0 lux). 0" in 2" 4" 8" 6" 12" 10" 14" 16" 8" 20 T F 7" 6" 15 EAN/UPC 100% 5" 4" 10 3" 5 2" 1" A R 0" 1" 2" 3" 0.125 mm / 5 mils 4" 5" 6" 7" D 8" 0.25 mm / 10 mils 0 5 10 15 0.
Appendix A — Specifications and Default Settings EV12 LInear Imager Typical Reading Distances The illustration below does not include the 0.12 cm (0.05 in) setback for the CK71. Typical reading distances are measured in an office environment (200 lux). 0" in 4" 8" 12" 16" 20" 24" 28" 32" 36" 16" 40 T F 14" 12" 30 10" EAN/UPC 100% 8" 20 6" 10 4" 2" 0 0" A R 2" 4" 6" 0.125 mm / 5 mils 8" 0.25 mm / 10 mils 10" 12" 0.
Appendix A — Specifications and Default Settings EX25 Near-Far Range Imager Minimum Reading Distance Minimum reading distances are measured in the dark (0 lux). The following graphic does not include the 0.24 cm (0.09 in) setback for the CK71. 0” 16” 32” 48” 64” 80” 96” 128” 112” 144” 160” 176” in T F 80” 200 160 64” 100% EAN contrast UPC 48” 120 80 32” 40 16” A R 0” 16” 32” 0.25 mm/10 mils 48” 0.5 mm/20 mils 1 mm/40 mils 64” 0 40 80 120 160 1.
Appendix A — Specifications and Default Settings EX25 Near-Far Range Imager Typical Reading Distance Typical reading distances are measured in an office environment (200 lux). The following graphics do not include the 0.24 cm (0.09 in) setback for the CK71. EX25 Near-Far Range Imager 1D Typical Reading Distances 0” 40” 80” 120” 160” 200” 240” 280” 320” 360” 400” 440” 480” in 160” 400 128” T F 320 100% EAN contrast UPC 96” 240 160 64” 80 32” 0 0” A R 32” 0.25 mm 10 mils 64” 0.
Appendix A — Specifications and Default Settings EX25 1D Symbologies Typical Reading Distances With 0.24 cm (0.09 in) Setback Symbology Density Minimum Distance Maximum Distance Code 39 0.25 mm (10 mils) 0.5 mm (20 mils) 1 mm (40 mils) 1.4 mm (55 mils) 2.5 mm (100 mils) 15 cm (5.91 in) 16 cm (6.30 in) 25 cm (9.84 in) 40 cm (15.75 in) ** 135 cm (53.15 in) 280 cm (110.24 in) 550 cm (216.54 in) 720 cm (283.46 in) 1200 cm (472.44 in) Code 128 retro-reflective 2.5 mm (100 mils) ** 1300 cm (511.
Appendix A — Specifications and Default Settings EX25 2D Symbologies Typical Reading Distances With 0.24 cm (0.09 in) Setback Symbology Density Minimum Distance Maximum Distance DataMatrix 0.25 mm (10 mils) 0.76 mm (30 mils) 1.4 mm (55 mils) 2.5 mm (100 mils) 7.5 mm (300 mils) 15 cm (5.91 in) 25 cm (9.84 in) ** ** 20 cm (7.87 in) 90 cm (35.43 in) 310 cm (122.05 in) 450 cm (177.17 in) 1100 cm (433.07 in) 1524 cm (600 in) T F ** Minimum distance depends on bar code width and scan angle.
Appendix A — Specifications and Default Settings Symbology Settings Symbology Default Value AustraliaPost Disable Aztec Disable BPO Disable CanadaPost Disable Codabar Disable Codablock A Disable Codablock F Disable Code 11 Disable Code 39 Enable Code 93 Disable Code 128/GS1-128 Enable T F DataMatrix Enable DutchPost Disable EAN/UPC Enable UPC A, UPC E, EAN 8, EAN 13 GS1 Composite Disable GS1 DataBar Expanded Disable GS1 DataBar Limited Disable GS1 DataBar Omni-Direction
Appendix A — Specifications and Default Settings Symbology Default Value SwedenPost Disable Telepen Disable TLC 39 Disable Symbology Option Settings Symbology Option Settings Default Value Preamble None (Disabled) Postamble None (Disabled) Symbology Identifier Disable Multicode Disable T F Scanner Settings Scanner Settings Default Value A R Trigger Predefined Modes Level Trigger Mode Level Aimer Mode Typical aimer Hardware Trigger Enable Trigger Timeout (sec) 2 Aiming Duratio
Appendix A — Specifications and Default Settings Imager Settings Default Value Image Capture Output Compression Output Compression Quality Edge Enhancement Noise Reduction Subsampling Image Rotation Image Lighting Correction Bitmap 0 None 0 None None Disable T F Decode Security Settings Decode Security Settings Default Value Consecutive Data Validation 0 Identical Consecutive Timeout 300 ms Different Consecutive Timeout 0 Center Decoding Disable Center Decoding Tolerance 0 A R Communicatio
Appendix A — Specifications and Default Settings 802.11 Radio Setting Default Value Import Pac Files False Radio Bands b/g (2.
Appendix A — Specifications and Default Settings RFID Setting Default Value – Frequency: 915MHz or 865MHz (Europe) – Tag Type: EPC Class 1 Gen2 – Dense Reader Mode: On – Field Separator: Space () T F – ID Report: On – No Tag Report: Off – Report Timeout: 0 – Timeout Mode: Off – ID Timeout: 5000 – Antenna Timeout: 5000 A R – ID Tries: 1 – Antenna Tries:1 – Read Tries: 3 – Write Tries: 5 – Initialization Tries:1 – Lock Tries: 3 – Select Tries: 1 D 70 Series Mobile Computer User Manual – Unsele
Appendix A — Specifications and Default Settings Device Settings Use device settings to configure settings on the mobile computer.
Appendix A — Specifications and Default Settings Sound Setting Default Value Key Clicks Off Keypad Settings Keypad Setting Default Value Button Remapping Scanner T F Power Management Settings Power Management Setting Default Value Enable Power Button Screen Screen Options Displayed On Hibernate, Suspend, Reboot 5 Suspend 5 minutes Disabled Disabled Disabled Disabled Screen Timeout (Seconds) Power Button Behavior Device Turns Off After (Battery Power) Screen Turns Off After (Battery Power) Devi
Appendix A — Specifications and Default Settings GPS Settings Use GPS settings to configure how the mobile computer communicates with the GPS network. GPS GPS Setting Default Value Enable Bread Crumbing Disable T F Core Messaging Service Settings Use core messaging service settings to configure the message routers between client and server software applications.
Appendix A — Specifications and Default Settings Device Health Screen Captures Device Health Screen Captures Setting Default Value Directory \SmartSystems\ScreenCapture Screen Captures Allowed 3 Device Wipe Device Wipe Setting Default Value Enable Wipe Disabled Interval (in days) Null T F Virtual Wedge Settings Use virtual wedge settings to configure the virtual wedge.
Appendix A — Specifications and Default Settings T F A R D 152 70 Series Mobile Computer User Manual
