User's Manual

Appendix A — About the IP2L
26 IP2L Snap-On LF/UHF RFID Reader User Guide
Physical Specifications
This section lists the physical, temperature, and humidity
specifications for the IP2L.
RFID Specifications
This section lists the RFID specifications for the IP2L.
* Maximum output power and operating frequency varies from
country to country based on regulations.
** Read and write range varies based on tag performance, reader
antenna gain, reader output power, and environmental conditions.
Length 63.8 mm (2.51 in)
Width 79.5 mm (3.13 in)
Thickness 34 mm (1.34 in)
Electrical rating
x 4.37 V 2 A / 4.8 V 1.5 A
Operating temperature -20 ºC to 60 ºC (-4 ºF to 140 ºF)
Storage temperature -30 ºC to 70 ºC (-22 ºF to 158 ºF)
Humidity
(non-condensing)
5 % to 95%
Supported LF tag types TI TIRIS at 134.2 kHz half duplex
Supported UHF tag types Class 1 Gen 2 EPC (ISO 18000-6C)
Frequency range* 902 to 928 MHz
Read and write range
(typical maximum)**
• Up to 45.1 cm (18 in) for UHF tags
• 2.2 cm (1 in) for LF tags
Electrical rating
x 4.37 V 2 A / 4.8 V 1.5 A
DRAFT