User's Manual
Table Of Contents
- Contents
- Before You Begin v
- About the IP2L Snap-On LF/UHF RFID Reader 2
- What You Need 3
- Connect and Enable the RFID Reader 4
- Remove the IP2L 6
- Charge the Computer Battery 7
- About the Status LEDs 8
- RFID Tag Read Positions 9
- Read and Write to RFID Tags 12
- RFID Applications and the IP2L 14
- Create Applications for the IP2L 14
- Configure the RFID Service Settings 15
- Configure the BRI Server Settings 15
- Configure the RFID Module Settings 16
- Call Product Support 22
- Troubleshoot the IP2L 23
- Physical Specifications 26
- RFID Specifications 26
- Before You Begin
- About the IP2L Snap-On LF/UHF RFID Reader
- What You Need
- Connect and Enable the RFID Reader
- Remove the IP2L
- Charge the Computer Battery
- About the Status LEDs
- RFID Tag Read Positions
- Read and Write to RFID Tags
- RFID Applications and the IP2L
- Create Applications for the IP2L
- Configure the RFID Service Settings
- Configure the BRI Server Settings
- Configure the RFID Module Settings
- Call Product Support
- Troubleshoot the IP2L
- Physical Specifications
- RFID Specifications
ii IP2L Snap-On LF/UHF RFID Reader User Guide
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2013 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,
and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
DRAFT