User's Manual
Table Of Contents
- Contents
- Before You Begin v
- About the IP2L Snap-On LF/UHF RFID Reader 2
- What You Need 3
- Connect and Enable the RFID Reader 4
- Remove the IP2L 6
- Charge the Computer Battery 7
- About the Status LEDs 8
- RFID Tag Read Positions 9
- Read and Write to RFID Tags 12
- RFID Applications and the IP2L 14
- Create Applications for the IP2L 14
- Configure the RFID Service Settings 15
- Configure the BRI Server Settings 15
- Configure the RFID Module Settings 16
- Call Product Support 22
- Troubleshoot the IP2L 23
- Physical Specifications 26
- RFID Specifications 26
- Before You Begin
- About the IP2L Snap-On LF/UHF RFID Reader
- What You Need
- Connect and Enable the RFID Reader
- Remove the IP2L
- Charge the Computer Battery
- About the Status LEDs
- RFID Tag Read Positions
- Read and Write to RFID Tags
- RFID Applications and the IP2L
- Create Applications for the IP2L
- Configure the RFID Service Settings
- Configure the BRI Server Settings
- Configure the RFID Module Settings
- Call Product Support
- Troubleshoot the IP2L
- Physical Specifications
- RFID Specifications
Chapter 1 — About the IP2L Features
IP2L Snap-On LF/UHF RFID Reader User Guide 7
Charge the Computer Battery
The IP2L is powered by the computer battery and can easily be
charged when the IP2L is connected to the computer. Use one of the
following charging accessories to charge computer battery when the
IP2L is connected.
Charging the Computer with the IP2L Attached
CN70/CN70e Charging Accessories
Charging Accessory Charging Time
DX1, DX2, or DX4 dock Up to 6 hours
CN70 and CN70e Vehicle Power Adapter Up to 6 hours
DRAFT