User's Manual
Table Of Contents
- Contents
- Before You Begin v
- About the IP2L Snap-On LF/UHF RFID Reader 2
- What You Need 3
- Connect and Enable the RFID Reader 4
- Remove the IP2L 6
- Charge the Computer Battery 7
- About the Status LEDs 8
- RFID Tag Read Positions 9
- Read and Write to RFID Tags 12
- RFID Applications and the IP2L 14
- Create Applications for the IP2L 14
- Configure the RFID Service Settings 15
- Configure the BRI Server Settings 15
- Configure the RFID Module Settings 16
- Call Product Support 22
- Troubleshoot the IP2L 23
- Physical Specifications 26
- RFID Specifications 26
- Before You Begin
- About the IP2L Snap-On LF/UHF RFID Reader
- What You Need
- Connect and Enable the RFID Reader
- Remove the IP2L
- Charge the Computer Battery
- About the Status LEDs
- RFID Tag Read Positions
- Read and Write to RFID Tags
- RFID Applications and the IP2L
- Create Applications for the IP2L
- Configure the RFID Service Settings
- Configure the BRI Server Settings
- Configure the RFID Module Settings
- Call Product Support
- Troubleshoot the IP2L
- Physical Specifications
- RFID Specifications
Chapter 1 — About the IP2L Features
IP2L Snap-On LF/UHF RFID Reader User Guide 3
What You Need
Before you can read and write to RFID tags using the IP2L, make sure
these items are installed on the computer:
• the latest Microsoft Windows Mobile Operating System (OS)
• the latest Intermec firmware
• the SR13082101_RFID_CX70WM65_ALL.CAB file
• a custom RFID application or the Intermec RFID Demo
application
You can download these files on the Intermec website at
www.intermec.com. For more information on how to install the
IP2L software, see the 70 Series Mobile Computer User Manual.
DRAFT