User Manual

6 PB2 Mobile Printer User’s Guide
Using the 2-Bay Battery Charger
2-Bay Battery Charger Accessory
1 Plug the AC adapter into the 2-bay charger.
2 Connect the adapter to AC power. The Status LEDs turn green,
indicating that the charger is ready to use.
3 With the contacts on the bottom and the arrow pointing toward
the LEDs, place a battery into one of the bays.
4 Slide the battery towards the LEDs. The battery snaps into place.
Installing a Battery in the 2-Bay Charger
If the battery is not charged, the Status LED for that bay turns red.
When the Status LED turns green, the battery is charged and ready
to use.
Status LEDs