User Manual

6 PB3 Mobile Printer User’s Guide
Using the 2-Bay Battery Charger
2-Bay Battery Charger Accessory
1 Plug the AC adapter into the 2-bay charger.
2 Connect the adapter to AC power. The Status LEDs turn green,
indicating that the charger is ready to use.
3 With the contacts on the bottom and the arrow pointing toward
the LEDs, place a battery into one of the bays.
4 Slide the battery towards the LEDs. The battery snaps into place.
Installing a Battery in the 2-Bay Charger
If the battery is not charged, the Status LED for that bay turns red.
The Status LED turns green when the battery is charged.
Status LEDs