User's Manual Part 2
Table Of Contents
- Chapter 3 - Configuring the Computer
- Developing Applications for the Computer
- Packaging Applications for the CN3 Computer
- Installing Applications on the Computer
- Updating the System Software
- Launching Your Application Automatically
- Customizing How Applications Load on the Computer
- Configuring CN3 Parameters
- Configuring the Color Camera
- Configuring the SF51 Scanner
- Using Configuration Parameters
- Chapter 4 - Maintaining the Computer
- Chapter 5 - Network Support
- Index
Chapter 5 — Network Support
156 PRELIMINARY - CN3 Mobile Computer User’s Manual
Configuring with SNMP
The community string allows an SNMP manager to manage the CN3
Computer with a specified privilege level. The default read-only commu-
nity string is “public” and “private” is the default read/write community
string. See the specific configuration parameter to find its OID.
To configure the CN3 Computers using SNMP
1 Configure CN3 Computers for RF communications.
2 Determine the OID (Object Identifier) for the parameter to change. The
Intermec base OID is 1.3.6.1.4.1.1963.
3 Use your SNMP management station to get and set variables that are
defined in the Intermec MIBs. You can set the traps, identification, or
security configuration parameters for SNMP.