User's Manual Part 2
Table Of Contents
- Chapter 3 - Configuring the Computer
- Developing Applications for the Computer
- Packaging Applications for the CN3 Computer
- Installing Applications on the Computer
- Updating the System Software
- Launching Your Application Automatically
- Customizing How Applications Load on the Computer
- Configuring CN3 Parameters
- Configuring the Color Camera
- Configuring the SF51 Scanner
- Using Configuration Parameters
- Chapter 4 - Maintaining the Computer
- Chapter 5 - Network Support
- Index
Chapter 5 — Network Support
152 PRELIMINARY - CN3 Mobile Computer User’s Manual
7 Do the following to enable WPA2 authentication:
a Set Authentication to “WPA2.”
b Set Data Encryption to either “AES” or “TKIP.”
c Enter the new Network key:
8 Do the following to enable WPA2 authentication using a preshared key:
a Set Authentication to “WPA2-PSK.”
b Set Data Encryption to either “AES” or “TKIP.”
c Enter the new Network key.