User's Manual Part 2
Table Of Contents
- Chapter 3 - Configuring the Computer
- Developing Applications for the Computer
- Packaging Applications for the CN3 Computer
- Installing Applications on the Computer
- Updating the System Software
- Launching Your Application Automatically
- Customizing How Applications Load on the Computer
- Configuring CN3 Parameters
- Configuring the Color Camera
- Configuring the SF51 Scanner
- Using Configuration Parameters
- Chapter 4 - Maintaining the Computer
- Chapter 5 - Network Support
- Index
Chapter 3 — Configuring the Computer
74 PRELIMINARY - CN3 Mobile Computer User’s Manual
1 Start your web browser and go to the Intermec web site at www.inter-
mec.com.
2 Go to Service & Support > Downloads.
3 Select Computers: CN3 Mobile Computer from the drop-down list.
4 Select which download you need. Make sure the download you select is
for the CN3 Computer.
5 Look at the description (or the ReadMe file) to determine if this down-
load will upgrade both the operating system and SSPB files, just the
operating system, or just the SSPB. You will need this information later.
6 Close the link and download the .zip file to your desktop or laptop com-
puter.
7 If you are using a mini-SD card to upgrade the CN3 Computer, see the
next page.
If you are using the SmartSystems Console to upgrade the CN3 Com-
puter, see “Using the SmartSystems Console to Upgrade the CN3
Computer” on page 76.
Using a Storage Card to Upgrade the Computer
To use a mini-SD storage card to upgrade the CN3 Computer, you need a
Secure Digital card reader and a mini-SD storage card formatted as FAT16.
• For both the operating system and SSPB files, see “Upgrading Both
Operating System and SSPB Files” on page 74.
• For just the operating system, see “Upgrading the Operating System”
on page 75.
• For just the SSPB files, see “Upgrading the SSPB Files” on page 75.
Upgrading Both Operating System and SSPB Files
You may download files that upgrade both the operating system and SSPB
files simultaneously. Note that this is a two-step process.
1 Extract the upgrade files to a folder on your desktop or laptop computer.
Make sure to select the option to use folder names when extracting files.
2 Place all individual root files onto your mini-SD card, this will update
your operating system only. Ignore the SSPB files at that point.
3 Insert the mini-SD card in the CN3 Computer. For help, see “Using the
Storage Card” on page 16.
4 Remove the battery pack from the CN3 Computer and place the CN3
Computer in a dock connected to external power. For help, see “Using
the Batteries” on page 7.
Note: The CN3 Computer currently supports Delkin Devices Secure Digi-
tal cards only. Intermec cannot guarantee that other mini-SD cards will
work with CN3 Computers.