User's Manual Part 2

Chapter 3 — Configuring the Computer
90 PRELIMINARY - CN3 Mobile Computer User’s Manual
Viewing SF51 Scanner Information from Your CN3 Computer
Note that in the CN3 Computer, the Intermec Settings applet can display
up to seven separate SF51 connections. The following illustration shows
such connections under the Data Collection option.
In this applet, tap Data Collection, then tap (+) to expand the SF51 Scan-
ner connections to view MAC addresses, firmware version numbers, and
whether each scanner is connected to the CN3 Computer. When you clear
(uncheck) Enable scanner port, the SF51 Scanner is disconnected from the
CN3 Computer. Check Enable scanner port again to reconnect.
If you want to rename these connections to descriptions more suitable for
your situation, press the stylus on each SF51 Scanner connection for a pop-
up menu, then select Rename. Enter the description, tap ok to save.
When the SF51 Scanner is connected, configuration changes take effect
immediately. When the SF51 Scanner is not connected, configuration
changes take effect once the SF51 Scanner is reconnected.
Using Configuration Parameters
A configuration parameter changes the way the CN3 Computer operates.
Use either of these methods to execute configuration parameters:
Scan EasySet bar code labels:
Use the EasySet application from Intermec Technologies Corporation to
print configuration labels. Scan labels to change imager configuration and
data transfer settings. See the EasySet online help for information.
Send Reader Commands through the Network or from an Application
See the Intermec Computer Command Reference Manual (P/N: 073529) for
more information.