User's Manual Part 5

Chapter 5 — Network Support
CN3 Mobile Computer User’s Manual 149
The Wireless icon (shaped like a radio tower) appears in the toolbar, a
check mark appears next to the “Wireless” option in the menu, and wireless
communications is enabled.
To configure wireless communications on the CN3
• Select Tools > Wireless Settings from the iConnect menu to access the
Profile Wizard for the 802.11b/g radio module.
To configure wireless 802.11b/g communications using the Profile Wizard
To view information about the Wireless 802.11b/g communications
• Select Tools > Wireless IP Settings from the iConnect menu for the
following:
To view the status of the Wireless communications
• Select Status > Wireless from the iConnect menu to view the status. Tap
Tr y A gain to check the status after you make changes to the connection.
Ping Test
To test the connection of your CN3 against your network
• Select Tools > Ping Test from the iConnect menu.
To ping your gateway or DHCP server
• Select Ping my gateway or DHCP server, then select which to ping
from the top drop-down list.
•Tap Start > Settings > the System tab > the Wireless Network icon to
access the Profile Wizard. Go to “Configuring Microsoft Security” on
page 175 for information.