User's Manual
Table Of Contents
- Before You Begin
- Using the CN4
- Connecting and Configuring the CN4
- Connecting to a PC
- Configuring the CN4 Parameters
- Configuring the Phone
- Configuring the CN4 for Your Network
- Configuring Wireless Security
- Developing and Installing Applications
- Troubleshooting and Maintaining the CN4
- Specifications
- Default Settings
- Standard Characters
- Index
Chapter 1 — Using the CN4
CN4 Series Mobile Computer User’s Manual 13
• Check the Enable Device Off check box to be able to turn off
the CN4 by pressing the Power button. This feature is enabled
by default unless you are using the Windows Mobile Phone
power profile.
• To change the amount of inactivity time before the CN4 turns
off and goes into Suspend mode, move the Battery Power or
External Power sliders.
For battery power, choose from 1 to 6 minutes.
For external power, choose from 1, 2, 5, 10, or 15 minutes, or
disable this feature.
5 Tap the Power Button tab to change what happens when you press
the Power button:
• Choose Turn off the Device if you want to put the CN4 in
Suspend mode when you press the Power button. In Suspend
mode, data connections are turned off. To restore data
connections, you need to press the Power button to wake up
the CN4.
• Choose Turn off the Screen if you want to leave the CN4 on
but with the screen turned off when you press the Power
button. This mode uses more power than Suspend mode, but
maintains all data connections. Press the Power button to turn
the screen on.