User's Manual Part 2
Table Of Contents
- Chapter 3 - Configuring the Computer
- Developing Applications for the Computer
- Packaging Applications for the CN3 Computer
- Installing Applications on the Computer
- Updating the System Software
- Launching Your Application Automatically
- Customizing How Applications Load on the Computer
- Configuring CN3 Parameters
- Configuring the Color Camera
- Configuring the SF51 Scanner
- Using Configuration Parameters
- Chapter 4 - Maintaining the Computer
- Chapter 5 - Network Support
- Index
Chapter 5 — Network Support
150 PRELIMINARY - CN3 Mobile Computer User’s Manual
3 Do the following to disable WEP encryption:
a Set Authentication to either “Open” if WEP keys are not required; or
“Shared” when WEP keys are required for association.
b Set Data Encryption to “Disabled.”
4 Do the following to enable WEP encryption:
a Set Authentication to either “Open” if WEP keys are not required; or
“Shared” when WEP keys are required for association.
b Set Data Encryption to “WEP.”
c To change the network key, clear The key is automatically provided,
then enter the new Network key and select the appropriate Key index.