User's Manual Part 2
Table Of Contents
- Chapter 3 - Configuring the Computer
- Developing Applications for the Computer
- Packaging Applications for the CN3 Computer
- Installing Applications on the Computer
- Updating the System Software
- Launching Your Application Automatically
- Customizing How Applications Load on the Computer
- Configuring CN3 Parameters
- Configuring the Color Camera
- Configuring the SF51 Scanner
- Using Configuration Parameters
- Chapter 4 - Maintaining the Computer
- Chapter 5 - Network Support
- Index
Chapter 5 — Network Support
136 PRELIMINARY - CN3 Mobile Computer User’s Manual
A profile contains all the information necessary to authenticate you to the
network, such as login name, password or certificate, and protocols by
which you are authenticated.
You can have up to four profiles for different networks. For example, you
may have different login names or passwords on different networks, or you
may use a password on one network, and a certificate on another.
Use the Profiles page to select and configure between the networking envi-
ronments assigned to this 802.11b/g radio.
Basic
Use the Basic page to set the network type, name, and manage battery
power for this profile. Tap ok to return to the Profiles page.
Profile Tap the drop-down list to choose between four different profiles assigned to this unit, then
tap Edit Select Profile, make the changes needed for this profile (starting on the next page),
then tap ok to return to the Profiles page.
Enable Microsoft's
Wireless Zero Config
Check this to enable Microsoft's Wireless Zero Config application and disable the Intermec
software solution for 802.11b/g, including configuration via the Wireless Network applet.