User's Manual Part 2
Table Of Contents
- Chapter 3 - Configuring the Computer
- Developing Applications for the Computer
- Packaging Applications for the CN3 Computer
- Installing Applications on the Computer
- Updating the System Software
- Launching Your Application Automatically
- Customizing How Applications Load on the Computer
- Configuring CN3 Parameters
- Configuring the Color Camera
- Configuring the SF51 Scanner
- Using Configuration Parameters
- Chapter 4 - Maintaining the Computer
- Chapter 5 - Network Support
- Index
Chapter 5 — Network Support
CN3 Mobile Computer User’s Manual - PRELIMINARY 125
3 Select the type of authentication. If you select A pre-shared key, enter
the key provided by your network administrator.
4 Enter your user name, password, and domain name as provided by your
ISP or network administrator, then tap Finish. If a domain name was
not provided, try the connection without entering a domain name.
Insert necessary equipment, such as a network card, into the CN3 Com-
puter, and use a desired program to begin connecting.
Ending a Connection
• When connected via cable or cradle, detach your CN3 Computer.
• When connected via Infrared, move the CN3 Computer away from the
other computer or device.
• When connected via a wireless network, switch off the connection.
• When connected via modem or VPN, tap the Connectivity icon on the
top, then tap Disconnect.