User's Manual Part 2
Table Of Contents
- Chapter 3 - Configuring the Computer
- Developing Applications for the Computer
- Packaging Applications for the CN3 Computer
- Installing Applications on the Computer
- Updating the System Software
- Launching Your Application Automatically
- Customizing How Applications Load on the Computer
- Configuring CN3 Parameters
- Configuring the Color Camera
- Configuring the SF51 Scanner
- Using Configuration Parameters
- Chapter 4 - Maintaining the Computer
- Chapter 5 - Network Support
- Index
Chapter 5 — Network Support
114 PRELIMINARY - CN3 Mobile Computer User’s Manual
Phone Application (GPRS/GSM Radios)
With the WAN radio module installed in your CN3 Computer, you can
send and receive telephone calls within your Wi-Fi range.
Use the speaker on the back of the computer as your earpiece and use the
connector on the bottom of the computer for your mouthpiece.
Activation
At factory-default, the phone is disabled. To turn on the phone, use either
of the following methods:
Wireless Manager
In the Wireless Manager, either tap All or tap Phone, then wait for “On”
to appear beneath the Phone row.
Tap Menu > Phone Settings to configure the phone (more information on
the next page). Tap Done to close the Wireless Manager.
Tap Start > Settings > the Phone desktop icon from the Personal tab or tap
Start > Phone to access the application which processes your phone calls.
Tap the Close button in the upper right corner of this application to close.
You can use the Wireless Manager to enable and disable Bluetooth, Wi-Fi,
and the Phone if it is built into your CN3 Computer.
To turn on the phone using the Wireless Manager, tap Start > Settings >
the Connections tab > the Wireless Manager icon, or tap the Wireless
Manager row from the Today desktop.