User's Manual Part 2
Table Of Contents
- Chapter 3 - Configuring the Computer
- Developing Applications for the Computer
- Packaging Applications for the CN3 Computer
- Installing Applications on the Computer
- Updating the System Software
- Launching Your Application Automatically
- Customizing How Applications Load on the Computer
- Configuring CN3 Parameters
- Configuring the Color Camera
- Configuring the SF51 Scanner
- Using Configuration Parameters
- Chapter 4 - Maintaining the Computer
- Chapter 5 - Network Support
- Index
Chapter 3 — Configuring the Computer
CN3 Mobile Computer User’s Manual - PRELIMINARY 89
3 Enter the Bluetooth address assigned to your CN3 Computer (shown in
your Bluetooth applet), then click OK to close this dialog.
4 The connection label for the SF51 Scanner appears to the right in the
EasySet application, similar to the following. Scan the label once, then
confirm the Intermec Ready-To-Work™ indicator (blue light) on the end
of the SF51 Scanner starts blinking, which means it is trying to connect.
When connected, the indicator assumes a steady blue, then SF51 data
gets wedged through the keyboard interface.