User's Manual

Chapter 2 — Connecting and Configuring the CN4
38 CN4 Series Mobile Computer User’s Manual
Configuring the Phone
The CN4 supports two types of cellular phone technology:
• CDMA EV-DO Rev A
• UMTS and GSM/EDGE
With the radio module installed in the CN4, you can send and receive
telephone calls as well as transmit data through wide-area (WAN)
cellular networks.
The CN4 provides a phone speaker, microphone, and speakerphone.
It also supports Bluetooth headsets or hands-free kits.
The factory default setting for the phone is enabled. After you activate
the phone, you can customize the features of the phone and network
settings. For help, refer to the Windows Mobile online help on your
CN4.
Activating the CDMA Phone
The CDMA WAN radio module is installed at the factory. To activate
your CDMA CN4 device, you need to contact the carrier you have
chosen and set up accounts for each device. Use the following table to
view the carriers that Intermec currently supports. If your carrier is
not listed in the table, please contact Intermec product support to see
if it is now supported.
The carrier will require the Electronic Serial Number (ESN) to start
the activation process. You can find the ESN:
• on a label located in the upper right corner of the battery
compartment.
• on the outside of the CN4 shipping box.
Currently Supported Carriers
Country Carrier
United States Alltel, Sprint, Verizon
Canada Bell Mobility, Telus