User's Manual Part 3

Chapter 5 — Network Support
CN3 Mobile Computer User’s Manual - PRELIMINARY 127
To view information about the Wireless 802.11b/g communications, select
Tools > Wireless IP Settings from the iConnect menu for the following:
To view the status of the Wireless communications, select Status > Wire-
less from the iConnect menu to view the status. Tap Try Again to check
the status after you make changes to the connection.
Ping Test
Select To o l s > Ping Test from the iConnect menu to test the connection of
your CN3 Computer against your network. If you want to ping your gate-
way or DHCP server, select Ping my gateway or DHCP server, then select
which to ping from the top drop-down list. If you want to ping a specific
host, select Ping the host address below, then enter its IP address in the
field beneath. After you make your selection, tap Ping! and wait for results.