User's Manual Part 1

Chapter 1 — Using the Computer
18 PRELIMINARY - CN3 Mobile Computer User’s Manual
Wireless Network Support
Radios are installed at the factory and cannot be installed by a user. The
CN3 Computer must be serviced to install or replace radios. Contact your
Intermec representative for more information. See Chapter 5, “Network
Support” for information about supported radios.
Accessories for the CN3 Computer
These are a few of the accessories available for your CN3 Computer. Con-
tact your local Intermec representative about ordering these and other
accessories that may be available.
Quad Battery Charger
Use the Quad Battery Charger to charge up to four CN3 battery packs.
Charge-Only Multidock
Use the Charge-Only Multidock to hold up to four CN3 Computers with
batteries installed, charge batteries, and provide power to CN3 Computers.
Ethernet Multidock
Use the Ethernet Multidock to hold up to four CN3 Computers with bat-
teries installed. The multidock charges the batteries, provides power to the
CN3 Computers, and provides one Ethernet connector.
Single Dock
Use the Single Dock to hold a CN3 Computer with its battery installed,
charge a spare battery pack, charge the main battery, and provide power to
the CN3 Computer. The dock has USB host and client connectors, a mod-
ule to convert the USB host to Ethernet, and a module to convert the USB
host to modem plug over the USB host connector.
Belt
Use this item to carry your CN3 Computer if it has either a 1D linear
imager or a 2D imager, and also accommodates a handle. This supports
either right- or left-handed use.
Note: Changes or modifications not expressly approved by Intermec could
void the user's authority to operate the equipment.