User's Manual Part 1

Chapter 1 — Using the Computer
CN3 Mobile Computer User’s Manual - PRELIMINARY 3
Learning Software Build Versions
The SmartSystems Platform Bundle (SSPB) is an area of storage embedded
in a section of the system’s FLASH memory. This storage area is not erased
when a clean-boot is performed. It may, however, be erased during the
reflashing process. In addition to storing applications and data files, you do
have the option to store a persistent registry to the SSPB region.
To check to see if your CN3 Computer has the latest SSPB or operating
system build, do the following:
2 Note the information beneath the CN3 Version Information title.
3 Tap the Close icon in the top right corner to exit the Internet Explorer.
Resetting Your CN3 Computer
In cases where the CN3 Computer completely stops responding, an appli-
cation is locked up and does not respond, when you upgrade the firmware,
or when you reflash the CN3 Computer, it may be necessary to perform a
clean-boot. Note that this will erase the memory in the CN3 Computer.
To perform a clean-boot
1 Press the power switch to suspend the CN3 Computer, then remove the
battery pack from the back of the CN3 Computer.
2 Simultaneously press the power switch in front and (with a stylus) the
cold reset switch in the battery cavity in the back.
1 Select Start > Internet Explorer > the Intermec logo.
Cold reset switch