User's Manual

Appendix B — Default Settings
66 CN50 Mobile Computer User’s Manual
Default Configuration
The following tables list the default values of the configuration
commands supported on the CN50. If you restore the CN50 to
factory default settings, the CN50 uses these values.
The commands are grouped by function and reflect the organization
of Intermec Settings. You can configure your CN50 with Intermec
Settings from the SmartSystems Foundation console. For detailed
information on most of the commands, see the Intermec Settings
Command Reference Manual (P/N 937-016-xxx), available from the
Intermec web site at www.intermec.com.
Data Collection
Data Collection Settings
Data Collection Setting Default Value
Enable Scanner Port Enable
Enable Scanner Auto-Detect Enable
Symbology Settings
Symbology Default Value
AustraliaPost Disable
Aztec Disable
BPO Disable
CanadaPost Disable
ChinaPost Disable
Codabar Disable
Codablock A Disable
Codablock F Disable
Code 11 Disable
Code 39 Enable
Code 93 Disable
Code 128/GS1-128 Enable
DataMatrix Enable