User's Manual

Chapter 3 — Developing and Installing Applications
CN50 Mobile Computer User’s Manual 45
Installing Applications Using a microSD Card
Using a microSD card is the best method for installing applications.
To install applications using the microSD card
1 Suspend the CN50 and remove the microSD card.
2 Insert the microSD card into a microSD adapter card and then
place it in the storage card reader connected to your PC.
3 Copy your application file to the microSD card.
4 Remove the microSD card from the adapter card and insert it into
the CN50.
5 On your CN50, navigate to the storage card folder and run your
application.
Installing Applications Using Wavelink Avalanche
You can use the Wavelink Avalanche device management system to
install applications on all of your wireless CN50s. The CN50 ships
with the Avalanche Enabler already loaded on it.
Each time the Avalanche Enabler is activated (typically on a reset), the
CN50 attempts to connect to the Avalanche Agent. When the CN50
connects to the agent, the agent determines whether an update is
available and immediately starts the software upgrade, file transfer, or
configuration update.
To use Avalanche to remotely manage the CN50
1 Install software packages and updates for the CN50 using the
Avalanche Administrative console.
2 Schedule the CN50 updates or manually initiate an update using
the Avalanche Administrative console.
For more information on using Wavelink Avalanche, contact your
local Intermec representative or visit the Wavelink web site at
www.wavelink.com.
Note: If you manually activate the Avalanche Enabler on the CN50,
you may be prompted for a password when you exit the Avalanche
Enabler. The default password is leave.