User's Manual

Chapter 2 — Connecting and Configuring the CN50
CN50 Mobile Computer User’s Manual 35
After you complete the activation process, the settings you enter are
permanently stored in the CDMA module. Changing the OS or SSPB
loads will not affect any of the settings or activation parameters
stored in the WAN modem.
To start the Activation Wizard
1 Tap Start > Phone from the Today screen.
2 In the Phone application, tap Menu > Activation Wizard from
the bottom of the screen.
Activating the UMTS Phone
You use a SIM card to activate the UMTS/HSPA phone on the CN50.
You can purchase the SIM card from your network provider. You
insert the SIM card in the battery cavity on the back of the CN50. For
more information, please contact your local Intermec representative.
To install the SIM card
1 Disconnect the handstrap from the top of the CN50.
2 Push forward on the battery release tab until the battery releases,
and then lift the battery away from the CN50.
3 Swing the card access door clockwise to expose the SIM card and
microSD card slots.
4 Insert the SIM card into the top slot until it clicks in place.
5 Close the card access door.
6 Insert the battery and press down until it clicks in place.
Reconnect the handstrap.
7
Press ^ to turn on the CN50.
Verizon Dial *22899 None - all parameters are automatically
transferred wirelessly.
You can also use the Activation Wizard
with Verizon.
Values Required for CDMA Phone Activation (continued)
Carrier Activation Method Activation Values You Need