User's Manual

Chapter 2 — Connecting and Configuring the CN50
34 CN50 Mobile Computer User’s Manual
• on a label located in the upper right corner of the battery
compartment.
• on the outside of the CN50 shipping box.
The activation process is slightly different for each CDMA carrier.
Your carrier sales contact and an Interme representative can guide you
through the process.
After you supply the ESN to your carrier, they will respond with values
that you must enter using the Windows Mobile Activation Wizard (if
required). Some of the supported carriers do not require you to enter
any values. The following table shows the carriers, the correct
activation method to use, and the values that you need to activate
your phone.
Values Required for CDMA Phone Activation
Carrier Activation Method Activation Values You Need
Alltel Dial *22899 None - all parameters are automatically
transferred wirelessly.
The Activation Wizard is disabled for
Alltel.
Bell Mobility Activation Wizard
• Service Programming Code (SPC),
also called the activation code.
• Mobile Directory Number (MDN)
• Mobile Station Identification
Number (MSIN)
• System ID (SID)
• Network ID (NID)
• Mobile Country Code (MCC)
• Mobile Network Code (MNC)
• Username
• Password
Sprint Activation Wizard
• Master Subsidy Lock (MSL), also
called the activation code
• MDN
• Mobile Station Identifier (MSID)
Telus Dial *22803 None - all parameters are automatically
transferred wirelessly.