User's Manual

Chapter 2 — Connecting and Configuring the CN50
32 CN50 Mobile Computer User’s Manual
Connecting the CN50 Using USB Communications
You can use the CN50 AC adapter to transmit data to and receive data
from another device through USB communications. For more
information about this accessory and how to order it, see
“Accessories” on page 90.
Configuring the Phone
The CN50 supports two types of cellular phone technology:
• CDMA
• UMTS
With a radio module installed in the CN50, you can send and receive
telephone calls as well as transmit data through wide-area (WAN)
cellular networks.
The CN50 provides a phone speaker, microphone, and speakerphone.
It also supports the use of a Bluetooth headset or hands-free kit. The
factory default setting for the phone is disabled.
After you have turned on the phone and activated it, you can
customize the features of the phone and network settings. For help,
refer to the online help on your CN50.
Turning On the Phone Using the Wireless Manager
You can use the Wireless Manager to enable and disable Bluetooth,
Wi-Fi, and the phone on your CN50.
To turn on the phone using the wireless manager
1 Tap Start > Settings > the Connections tab > Wireless Manager.