User's Manual
Table Of Contents
- Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Connecting and Configuring the CN50
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting andMaintaining the CN50
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 2 — Connecting and Configuring the CN50
CN50 Mobile Computer User’s Manual 31
To select the current wireless printer
1 Select Start > Settings > the System tab > Wireless Printing.
2 Tap Search to find a printer, or tap Manual to enter a device
address. Follow the onscreen instructions to select the current
wireless printer.
3 (Optional) Tap Print Test Page. The printer prints out the test
page.
Connecting the CN50 Using Ethernet Communications
You connect your CN50 to your Ethernet network with an ethernet
cable and an AD24 ethernet multidock.
To use your CN50 in an Ethernet network
1 Connect your CN50 to an ethernet network with an AD24.
Ethernet communications is automatically enabled on your CN50.
2 Make sure that your CN50 is communicating with the network
and that the network can see your CN50.
Note: You can also print wirelessly using Microsoft APIs with
Bluetooth extensions for Winsock and Bluetooth virtual COM ports.
For help, see the IDL, available from the Intermec web site at
www.intermec.com/idl.