User's Manual

Chapter 2 — Connecting and Configuring the CN50
CN50 Mobile Computer User’s Manual 29
• If you choose WPA or WPA2, Data Encryption is
automatically set to TKIP.
• If you choose WPA-PSK or WPA2-PSK, Data Encryption is
automatically set to TKIP and you need to enter a Network
key.
5 Tap Next.
6 For EAP type, select PEAP from the list and tap Finish. You
return to the Configure Wireless Networks page.
7 Tap Connect. The CN50 prompts you to enter this network
information:
• User name
• Password
8 Tap OK. You device will connect to the network.
9 Make sure that your CN50 is talking to the network and that the
network can see your CN50.
Connecting the CN50 Using Bluetooth Communications
You CN50 is Bluetooth™-enabled, which lets you connect to other
Bluetooth devices, such as printers.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
To turn on the Bluetooth radio
1 Tap Start > Settings > the Connections tab > Bluetooth > the
Mode tab.
2 Tap Turn on Bluetooth.