User's Manual
Table Of Contents
- Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Connecting and Configuring the CN50
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting andMaintaining the CN50
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 1 — Using the Computer
CN50 Mobile Computer User’s Manual 21
Using the GPSID Installed on the CN50
To use the GPSID installed on your CN50, you need to configure the
GPSID settings.
To configure your GPSID settings
1 Tap Start > Settings > the System tab.
2 Tap External GPS. The GPS Settings screen appears.
3 On the Programs tab, select the COM port that you want your
programs to use to get GPS data from your CN50.
4 Tap the Hardware tab, and select these settings.
GPS hardware port: COM3
Baud rate: 57600
Note: COM1 and COM3 are reserved.