User's Manual
Table Of Contents
- Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Connecting and Configuring the CN50
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting andMaintaining the CN50
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 1 — Using the Computer
CN50 Mobile Computer User’s Manual 19
• The compression level.
3 Click ok.
Using a microSD Card
You can use a micro Secure Digital (SD) card to increase file storage
and install software. The CN50 supports an optional 32 GB
maximum capacity microSD™. The microSD card slot is located in
the battery compartment.
To install a microSD card
1 Remove the battery. For help, see “Removing and Installing the
Battery” on page 4.
2 Swing the card access door clockwise to expose the SIM card and
microSD card slots.
3 Insert the microSD card in the bottom slot and push in until it
clicks into place.
4 Install the battery.
5 Press £ to turn on the CN50:
• You should be able to navigate to the SDMMC Disk folder and
see the contents of the microSD card.