User Manual
Table Of Contents
- Before You Begin
- Using the CN4
- Connecting and Configuring the CN4
- Connecting to a PC
- Configuring the CN4 Parameters
- Configuring the Phone
- Configuring the CN4 for Your Network
- Configuring Wireless Security
- Developing and Installing Applications
- Troubleshooting and Maintaining the CN4
- Specifications
- Default Settings
- Standard Characters
- Index
Chapter 3 — Developing and Installing Applications
CN4 Series Mobile Computer User’s Manual 71
3 Select Computers: CN4 Mobile Computer from the list.
4 Select the download you need. Make sure the download you select
is for the CN4 computer and that it contains the upgrade you
want: operating system only, SSPB only, or operating system and
SSPB.
5 Download the .zip file to your desktop computer.
6 Use the SmartSystems server to upgrade the CN4.
To upgrade the operating system
1 Connect your the CN4 to your network that has the SmartSystem
Server installed.
2 Install SmartSystems Foundation on your desktop or laptop
computer, then double-click the icon on your toolbar to start the
SmartSystems Console.
3 Double-click the SmartSystems icon on your taskbar to start the
SmartSystems Console.
The SmartSystem Console screen has three sections:
• Keypad Computers (devices you are using)
• SmartSystem Applications (used to upgrade)
• Software Vault (where your upgrades are stored)
4 Click the Discover icon on the SmartSystems Console.
5 Click and drag the OS bundle from the Software Vault and drag to
the CN4 icon. Release the OS bundle on the device icon and the
following message will appear.
Note: You cannot install the files for the OS and the SSPB bundle at
the same time. You need to install one and then install the other or
install only the bundle that you need to upgrade.