User Manual

Chapter 2 — Connecting and Configuring the CN4
52 CN4 Series Mobile Computer User’s Manual
a Enter a User Name.
b For Prompt for Credentials, choose Enter credentials now.
c Enter a User Password.
d For Validate Server Certificate, choose Yes .
If you choose TLS:
a Load a user and root certificate on your CN4. For help, see
“Loading a Certificate” on page 57..
b For Validate Server Certificate, choose Yes.
c Enter a User Name and Subject Name.
d (Optional) To increase your level of security, enter a Server 1
Common name and a Server 2 Common name.
10 Tap OK. Your settings are saved.
Configuring LEAP Security on Your CN4
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For 8021x, choose LEAP.
7 For Association, choose Open, WPA, WPA2, or Network EAP.
Encryption automatically defaults to TKIP if you choose WPA,
AES if you choose WPA2, and WEP if you choose Open or
Network EAP.
8 For Prompt for Credentials, choose Enter credentials now.
9 Enter a User Name and User Password.
10 Tap OK. Your settings are saved.
Note: You can use Prompt for Credentials to troubleshoot
your network connection.