User Manual
Table Of Contents
- Before You Begin
- Using the CN4
- Connecting and Configuring the CN4
- Connecting to a PC
- Configuring the CN4 Parameters
- Configuring the Phone
- Configuring the CN4 for Your Network
- Configuring Wireless Security
- Developing and Installing Applications
- Troubleshooting and Maintaining the CN4
- Specifications
- Default Settings
- Standard Characters
- Index
Chapter 2 — Connecting and Configuring the CN4
50 CN4 Series Mobile Computer User’s Manual
8 Tap OK. Your settings are saved.
Configuring WPA Security With Funk Security
Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-PSK, or
WPA2-PSK security on your CN4 with Funk security.
To configure WPA-802.1x or WPA2-802.1x with Funk security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose WPA or WPA2. Encryption
automatically defaults to TKIP or AES, respectively.
7 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS.
8 If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials now.
b Enter a User Name and User Password.
c For Validate Server Certificate, choose Yes.
If you choose TLS:
a Load a user and root certificate on your CN4. For help, see
“Loading a Certificate” on page 57..
b Enter a User Name and Subject Name.
c For Validate Server Certificate, choose Yes.
Note: You can use Prompt for Credentials to troubleshoot
your network connection.
Note: The correct date must be set on your CN4 when you
enable Validate Server Certificate.