User Manual

Chapter 2 — Connecting and Configuring the CN4
CN4 Series Mobile Computer User’s Manual 41
Turning the Phone On and Off
If you have Intermec Security enabled on the CN4, use the iConnect
utility to turn the phone on or off.
If Microsoft Security is enabled on the CN4, use the Wireless Manager
application to turn the phone on or off. For information on enabling
and configuring Microsoft security, see “Selecting Microsoft as
Your Security Choice” on page 53.
You can use the Wireless Manager to enable and disable Bluetooth,
Wi-Fi, and the phone.
To turn on the phone using the wireless manager
1 Tap Start > Settings > the Connections tab > Wireless Manager.
2 In the Wireless Manager, tap Phone. The phone turns on.
3 Tap Menu > Phone Settings to configure the phone. For help, see
the next procedure, “Activating the CDMA Phone.”
4 Tap Done to close the Wireless Manager.
Configuring the CN4 for Your Network
The CN4 is a versatile mobile computer that you can easily add to
your wireless or wired data collection network. You can connect your
CN4 using:
• 802.11b/g radio communications.
• Bluetooth communications.
• Ethernet communications
• USB and serial communications.