User Manual

Chapter 1 — Using the CN4
CN4 Series Mobile Computer User’s Manual 31
4 To view saved images, tap Options and choose Gallery.
Tap and to view the images one at a time.
Tap to zoom in, or tap to zoom out.
To discard the image, tap . To discard all saved images, tap
Options and choose Delete All Files.
To exit the Gallery, tap Options and choose Exit Gallery.
5 To close the application, tap ok.
Configuring the Image Capture Application
The default Image Capture settings apply to most situations where
the ambient lighting is adequate for office work. However, you may
need to change those settings depending on the conditions in which
images will be captured, such as outdoors in bright sunlight or inside
a darkened warehouse.
To configure Image Capture settings
1 Tap Options and choose Settings.
2 Change settings as needed.
3 Tap Options and choose Save Changes and Exit, or choose
Discard Changes and Exit to abandon your changes.
Capturing Documents
Use the Enhanced Mobile Document Imaging (eMDI) application to
capture documents and create electronic files of printed documents.
To start the eMDI application
• Tap Start > Programs > Document Imaging.
Note: A watermark appears in eMDI image files unless you have
purchased a valid license. For more information, contact your
Intermec sales representative.