Specification

www.intermatic.com
WP Extra-Duty Die-Cast Series
Model Number Type FlexiGuard Insert # Depth (in)
WP3110MXD Single-Gang WP17 2 ¾
WP1010MXD Single-Gang WP17
3
1
⁄8
WP1010HMXD Single-Gang/Horizontal WP17
3
1
⁄8
WP1030MXD Double-Gang WP217
3
1
⁄8
WP1250MVXD Single-Gange/Vertical WP17
4
5
⁄8
WP1250MXD Double-Gang WP217
4
5
⁄8
Diagrams
Specification for Single-Gang
The weatherproof cover shall be designed to mount on a single-gang ______________, junction box to ensure while in
use weather protection for a standard receptacle. The cover shall mount on indoor or outdoor junction boxes and shall
include a weatherproof cover/base assembly, a gasket, three universal inserts, and mounting hardware. The outlet cover
shall meet UL requirements for wet locations. The weatherproof cover shall be designed to meet requirements of with
2014 NEC Article 406.9(B)(1) for wet locations and extra-duty applications and shall be UL Type 3R listed. The
weatherproof cover shall be constructed entirely of die cast aluminum. The cover, which encloses the cord set, shall
be gray. The cover shall meet agency requirements for cold impact at -60°F (-51°C). The cover shall provide usable
inside depth of ____________ (2 ¾")(3
1
⁄8")(4
5
⁄8"). The weatherproof cover shall be Intermatic model _____________
(See Model Numbers Listed).
Specification for Double-Gang
The weatherproof cover shall be designed to mount on a double-gang______________ (Vertical), junction box to
ensure weather protection for a standard receptacle. The cover shall mount on indoor or outdoor junction boxes and
shall include a weatherproof cover/base assembly, a gasket, six universal inserts, and mounting hardware. The inserts
must provide exibility for mounting at any angle including: 90°, 180°, or 270°. The outlet cover shall meet UL
requirements for wet locations. The weatherproof cover shall be designed to meet requirements of 2014 NEC Article
406.8(B)(1) for wet locations and extra-duty applications and shall be UL Type 3R listed. The weatherproof cover and
base shall be constructed entirely of die cast aluminum. The cover, which encloses the cord set, shall be gray. The cover
shall meet agency requirements for cold impact at -60°F (-51°C). The cover shall provide a usable inside depth
of ___________(3
1
⁄8")(4
5
⁄8"). The weatherproof cover shall be Intermatic model ____________________
(See Model Numbers Listed).
WP217
WP17
Weatherproof