Specification

Project:
Location:
Product Type:
Contact/Phone:
Model #:
Weatherproof
WP Extra-Duty Die-Cast Series
The extra-duty die-cast aluminum Series While-In-Use Covers are
easy to install and shipped with a gasket, mounting screws, base and
cover assembly, and inserts for a variety of applications.
Features
• Complies with 2014 Article 406.9(B)(1) for Wet Locations and
Extra-Duty Applications
• Heavy-Duty die-cast Aluminum construction ensures long-lasting
durability
• Single-Gang Models:
3 inserts provided with all models that allow
each model to meet multiple installations
(up to 16 congurations)
• Double-Gang Models:
6 inserts provided with all models that allow
each model to meet multiple installations
(up to 70 congurations)
2 round inserts accommodate from
1.375". to 2.656" plugs for the 30/50
amp applications.
• Reinforced Hinge Pin - designed to exceed 40lb Hinge
Hang/Stress Test
• Impact Rated: 12 lb impact test to ensure cover remains in-tact
• Lockable Hasp: All models accept up to 0.25" Dia Shank
• Meets requirements for cold impact testing: -60°F (-51°C)
Ratings
Cover: Die-Cast Aluminum
UL Certied for Type 3R
Outdoor Enclosures
Single-Gang :
WP3110MXD – 2 cord outlets 0.6” high by
1.1” wide
WP1010MXD – 2 cord outlets .6” high by
1.1” wide
WP1010HMXD – 2 cord outlets 0.6” high by
2.1” wide
WP1250MVXD – 2 cord outlets 0.6” high by
1.1” wide
Double-Gang :
WP1030MXD – 2 cord outlets 0.6” high by
0.8” wide
WP1250MXD – 2 cord outlets 0.6” high by
2.0” wide
Mounting Base: Die-Cast Aluminum
Inserts: UV stabilized polycarbonate
Gasket: Neoprene -
1
⁄8" (4.8 mm) thick with
slits for mounting screws
Max Cord Size: Single-Gang – (2) 14 Gauge or (2) 12 Gauge
Double-Gang – (2) 14 Gauge or (2) 12 Gauge
Warranty: Limited 1 year
WP1010HMXD
WP1250MVXD
WP1250MXD
WP Extra-Duty Die-Cast Series
Weatherproof Receptacle Covers